Category: News

While we wait for the results announcement which should come in about 2 weeks via a live webinar with John Troyer and Turbonomic, I thought I would release some statistics on the results as an appetizer before the big meal arrives.

• This year there were 1600+ votes, which is about the same as last year.
• There were 321 blogs in the voting last year, this year there were 273. Blogs that did not have at least 10 posts in 2016 were left off the voting ballot this year.
• There were 62 new blogs added this year to the ballot that were not there last year.
• There was 1 new blog (started in 2016) that made the top 50.
• There were 11 additional blogs that made it into the top 50 that were not there last year.
• There were 8 blogs that made it into the top 25 that were not there last year.
• There was 4 new blogs to the top 10 (one blog from last year did not qualify and Duncan/Frank chose to step down).
• There was 9 position changes in the top 10.
• Do we have a new #1? Of course we do as Duncan did not participate, who will it be? Watch the live results show to find out.

So the voting closed about 2 weeks ago and we had over 1,600 people vote this year. Afterwards I had to export all the survey data to Excel and apply the weights to all the votes to get a total point score for each blog. The way that works is a #1 vote is worth 12 points, #2 vote is worth 11 points and so on down to a #12 vote is worth 1 point. In the past I’ve had to manually count the number of #1, #2, #3, etc. votes for each blog but starting last year I was able to automate it in Excel so it’s much simpler and accurate.

This year there are two additional point modifiers that are applied to each blog that factor into the total point score. These were added in an attempt to make this less about the popular vote and reflect the work the bloggers put into maintaining their blog. The first is the number of posts that a blog had in the year, I applied 2 points for each post up to a maximum of 400 points, so the more active a blogger is they are rewarded for it and will be ranked higher. For any site that was a pure blog aggregator with automated content they were scored at the minimum 10 posts.

The second score modifier is based on how well a site is constructed and how well the end user experience is. Any blog that was bloated and inefficient is scored lower than blogs that are optimized and fast. The measurement for this that I used was Google Pagespeed which analyzes a website and scores it with a percent with 100% being best. I ran every blog through Pagespeed and the resulting percent is used as a score modifier. Every blog started with 200 possible points available which was reduced by the resulting Google Pagespeed percent. So if your blog scored a 70% it would have a 140 point modifier applied to you your total point score.

So the resulting score looks like this:

• Voting points + post points (max 400) + Pagespeed points (max 200) = total point score

I’ve spent hours and hours in Excel getting all these modifiers in, thanks to Andreas’s blog post counts it helped me immensely not have to count blog posts for each blog but there were still a few dozen that I had to go count. So all the scoring is now complete and we’ll be announcing the results via a live Top vBlog Results Show hosted by Turbonomic with myself, Eric Wright and John Troyer. We’ll be using a standard webinar platform this time around as Google Hangouts was rather limited and a pain to use.

Also this year instead of doing commemorative coins we’re giving nice 1.5″ lapel pins to the Top 50 bloggers. They will be different medals just like the coins were for Top 10/25/50 and because there are no die costs we can have them made Top 10, Top 25 and Top 50 instead of all of them saying Top 50. The pins will be done before VMworld US and you can pick them up there, if you are not attending we can mail them to you.

So stay tuned for the details, the webinar will be held the first week of August.

Despite an initial rough start with the NetGear Orbi Home Wifi System I’ve been a big fan of it up until today. The reason I bought the Orbi was because I kept having wifi drops in some areas of my house with my Asus RT-AC87U router due to it’s placement. I play a lot of online games like Clash of Clans and if you know CoC the dreaded wifi symbol while you are playing is not something you want to see. That symbol means your connection sucks and you are about to get dropped, I would get that frequently with my Asus router at the far end of my house. Once I had Orbi up and running my wifi problems were completely gone for 7 months, until today.

Netgear pushed out a 1.12.0.18 update to my router and satellite last night and today I awoke to constant and frequent disconnects on both my iPad Air 2 and Galaxy S7 Edge. I could literally not go a minute without a disconnect. I called their support who was basically useless, they said to enable Implicit Beamforming which has been disabled by default many updates ago because of issues it caused with some devices. I tried that anyway and it seemed to help a little with the iPad but not the Galaxy S7.

Ironically Netgear had a big focus on fixing wifi disconnects with this update which has apparently plagued them from the beginning, read the Netgear forums and there are lots of threads on this issue like this one and this one. They also have problems with the Orbi losing connection to your internet device (i.e. cable modem), I also experience this frequently as well, the only fix is to reboot the cable modem. Most of the updates up until now have not really done all that much, this one had a lot of big fixes as seen below:

• Fixes the iOS disconnection issue.
• Fixes the Dropcam disconnection issue.
• Fixes the convergence issue when an Ethernet connected device moves from one Orbi to another.
• Fixes the issue where the Orbi app can’t find the Orbi router if the router is using IPv6 and is in AP mode.
• Fixes the issue where the Orbi app can’t display more than 20 connected devices.
• Fixes the issue where the installation assistant might not display if the device is connected to the Orbi network wirelessly.
• Fixes the issue where the 2.4 GHz backhaul setting is disabled if the fronthaul MU-MIMO and TxBF is disabled.
• Fixes the issue where IPv6 devices on the guest network can access the Orbi router’s web GUI.
• Includes security fixes for the following security vulnerabilities:PSV-2016-0133, PSV-2017-0607, PSV-2017-0615, PSV-2017-0736, PSV-2017-2190

So an update that supposedly fixes disconnect issues (which I never experienced) does the opposite and starts causing them instead. Thank you Netgear for breaking my perfectly wonderful wifi system. Apparently their engineering team has been spending most of their time introducing new Orbi devices and not spending much time refining their current firmware.

I ended up downgrading both my router and satellite to the prior version which is 1.11.0.20 which has been working perfectly. In fact I have never had an issue with an Orbi update until now, I’m beginning to suspect the reason why is that they haven’t really done much with any of their 11 updates up until this one. Look at their typical release notes for the last 3 updates:

• 1.10.1.2 – Fixed few bugs
• 1.9.1.2 – Fixes bugs and security issues. – Improves the firmware upgrade process. – Continuous improvement in wireless connection stability
• 1.8.0.6 – Fixes bugs and security issues. – Supports Korea wireless region

Now that they have finally starting to pay attention to some of the serious issues that Orbi has had they have apparently tried to fix some things and broke other things. At this stage with this new update I’m not going to update past 1.11.0.20 until Netgear gets their act together which is a shame as I will be missing out on potentially other fixes and enhancements. I loved my Orbi up until today and just yesterday was recommending it to people. However after this update dropped I will not recommend it anymore and may just end up migrating to one of the competing systems from Ubiquiti, Google and Eero which is a shame as Netgear had a good thing going with Orbi. Ultimately it comes down to what works best for me and if Orbi can no longer deliver that anymore than it’s adios amigo.

I submitted two sessions on VVols as part of the VMworld Call For Papers this year. Based on the great attendance at my VVols session last year I was hoping to get at least one through. So when the notices went out that both my sessions were declined I was a bit disappointed. The rational notes that we got back said “BU direction to cut back on the # of VVols sessions for VMworld”. I also made some inquiries at VMware and confirmed this, apparently the VMware Storage BU has decided to stop marketing VVols and as a result they declined just about every submission related to VVols this year. This is in sharp contrast to last year were there were 5 VMware VVol sessions, 1 partner panel and 9 partner VVol sessions.

So why did VMware decide to stop promoting and marketing VVols? Simple reason is it’s basically a feature or core architecture of vSphere, it’s not really a product that they sell or monetize in any way like VSAN is for them. I believe they feel they have done enough already to promote VVols since it’s initial launch in March 2015 and now it’s up to the storage vendors to promote their own VVols solutions. When you think about it, it’s basically the same as other core integration features like the vSphere APIs (VAAI, VADP, etc). At it’s core VVols is mainly VASA which is the specification that VMware writes that allows storage vendors to develop VVols solutions specific to their own arrays. As a result every storage vendor is going to have their own VVols solution were they can pick and choose what capabilities they want to advertise to storage policies and what features they want to implement to support VVols.

So does this mean that nobody cares about VVols anymore? I think that is far from the case, VVols is still relatively new and there are a lot (most) of storage vendors still trying to catch up with it and deliver mature solutions for VVols. There are definitely some great benefits that VVols provides and it will take time for it to become the norm as customers (and VMware) migrate away from VMFS. I talk to people about VVols fairly often and the education and understanding level of what VVols is and why a customer would want to migrate to it are very low. I do find that as customers discover more about VVols their interest level in it grows significantly.

I was talking a 3PAR product manager the other day who recently attended HPE Discover and he had a lot of people asking about VVols to try and learn more about. I find the same to be true at VMUG events I attend and the fact that I had almost 1,000 people register for my VMworld VVols session last year proves that customer interest in VVols is high. Now that VMware has pulled back from promoting VVols, it’s now up to the storage vendors to do more to promote it and educate customers. For any vendor with a solid VVol solution it’s clearly to their advantage to market that as there are many storage vendors struggling to catch up with VVols and having a solid and mature solution is a competitive edge in VMware environments.

As for the number of VVols sessions at VMworld this year, it was 2 but I see a 3rd one was just added to the Content Catalog (see below). There is only 1 VMware session on VVols, it’s the VVol Deep Dive they do every year with Patrick Dirks & Pete Flecha. The other 2 are sponsor sessions as no VVol partner submissions made it through the CFP process. One is a HPE/Nimble session on VVol Replication which is basically one of the submissions I did for the CFP turned into a sponsor session (without adding any marketing). I have one of our 3PAR engineers joining me for that session to give a very technical deep dive on VVol replication. I was also able to add Julian Cates from Nimble to the session as well as HPE & Nimble are the only 2 vendors that support VVol replication today. The other partner session is from Pure Storage who is finally bringing their VVol solution to market.

So if you are attending VMworld this year and want to know more about VVols and the new replication capability in vSphere 6.5 be sure and sign up for our HPE sponsor session and we will do our best to give you a great technical deep dive on it.

QNAP has a great product line of disk appliances to fit every user from small home and SMB units all the way up to enterprise level rack mount units. Embedding a backup application within those units makes for a seamless administration experience that puts the backup console within the disk management console. Nakivo previously announced support for Synology disk appliances and has now just recently announced support for QNAP disk appliances as well.

The benefits of this solution include easier management as backup and disk management are unified. It also frees up virtual infrastructure resources that were previously used for backup and results in a smaller footprint and less maintenance. Additionally it also increases efficiency by allowing higher VM backup speed by up to 2x compared to VM-based backup solutions. This is achieved because backup data is written directly to the NAS disks, bypassing network protocols such as NFS and CIFS.

All in all having disk and backup combined just makes sense and when you couple that with Nakivo’s rich feature set and affordable price point you end up with a great well-integrated backup solution. Want to see for yourself? Nakivo lets you try before you buy with a trial edition so you can experience the benefits first hand. So if you want to ensure that your VMware environment is well-protected from data corruption, malware, user mistakes, hardware failures or disasters give Nakivo a look and get peace of mind for an affordable price.

I wrote in my last post that voting for Top vBlog 2017 would be kicking off this week but I have a slight delay as I work to find a new survey tool that can meet my requirements. The survey tool I had used for years, SurveyGizmo worked great for me but they recently changed their plan pricing and it would of cost me 10x more than usual as the features I need are in their most expensive plan and you can no longer buy it on a monthly basis. I thought I had found a replacement with SurveyMonkey but after signing up for a year plan and trying to setup my Top vBlog survey that’s when things quickly fell apart.

SurveyMonkey did support the one must have feature for me, piping between questions, many survey tools do not support this. This is needed so after someone selects their 12 favorite blogs I can pipe them to the next question so they can rank therm. However, many of the other features that I used with SurveyGizmo weren’t there on SurveyMonkey, I couldn’t bulk import html answers, didn’t allow for indicating maximum selection of multiple entries (you could select more and it gave a vague error), most of these weren’t ideal but I could work around, but the big kicker for me they had a max limit on their answers at 200, we usually have way more blogs than that participating. Overall I found there survey tool a bit difficult to use and lacking so I requested a refund and continued to search for another tool.

After looking at dozens of survey tools, requesting trials and asking questions I think I finally found one, QuestionPro. After talking to their support it looks like their Corporate plan will do everything I need, I haven’t set it up yet so I have my fingers crossed, so after a slight delay I should hopefully have the voting open next week. Stay tuned and get ready.